The first DC isolator fully compliant with AS60947.3:2018 DC-PV2
The DC isolating switches must now have a valid Certificate of Conformity confirming the product complies with AS 60947.3:2018 in Australia, the DC rating up to DC-PV2.
And a breathing valve shall be installed on the DC isolator.
ZJBENY offers the leading DC isolators fully compliant with AS60947.3:2018 DC-PV2 and installation requirements in Australia.
Always the first DC isolator manufacturer follows the new requirements.
1000V DC Isolator in aluminum enclosure version
IP66 1000V 32A true DC isolator switch BYH-32 in aluminum enclosure version, shall be installed between the solar arrays and solar inverter.
For isolation the PV array during system installation or any maintenance.
Recommend as a standard isolator to solar installers in grid connected solar PV systems install and supervise guidelines.
Specification:
* 1000VDC 32A
* IP66 vertical and horizontal installation
* UV resistance and flame retardant material.
* Arc extinguished in 3ms
* AS 60947.3:2018, IEC 60947.1:2015
* Breather valve
* Lockable at off position
* Anti-counterfeit label for original ZJBENY
* 5 years warranty and product insurance
Model | BYH-32 |
Poles | 4P |
Standard | IEC60947.3,AS60947.3 |
Utilization Category | DC-PV2 / DC-21B |
Rated Operational Voltage (Ue) | 500V,600V,800V,1000V |
Mechanical Cycle | 15000 |
Electrical Cycle | 1000 |
Protection Degree | IP66 enclosure/IP20 switch body |
Polarity | No Polarity |
Certificate | SAA / TUV / CB |
Hot Tags: Aluminum Enclosure, IP66 DC Isolator, 1000V DC Isolator Switch, 32A Solar Isolator Switch , DC Isolator Switch China, DC Isolator Switch supplier, DC Isolator Switch manufacturer, DC Isolator Switch factory, DC Isolator Switch quotation, zjbeny
