A MODE 3 (IEC61851-1) FAST EV CHARGER FOR RESIDENTIAL USE
The simple non-smart EV charger BCP-A1-L has an IP65 patented design case for outdoor and indoor use.
The type 2 charging connector makes highly flexible and compatible with all electric vehicles.
Plug and start to charge automatic. (RFID card for option)
The EV charger output can be adjusted from 16 amps (11kW) all the way up to 32 amps (22kW)
PEN FAULT DETECTION
Monitors the electrical system and in the event of a fault automatically disconnects all poles including the earth conductor.
DYNAMIC LOAD BALANCING FUNCTION
For safely balance the energy usage between your electric car chargers and other home appliances to make your car chargers in the most efficient way.
|
Electrical |
|
|
Charging capacity |
1.3kW-7.4kW / 4.1kW-22kW |
|
Charge mode |
Mode 3 (IEC 61851-1) |
|
Output power |
Selectable 1-phase or 3-phase, 230-400V 6 A to 32 A, 50-60 Hz |
|
Connector options |
Fixed cable type 2 plug or type 2 Socket |
|
Fixed cable length |
6m (18 ft) |
|
Cable Entry |
Rear or bottom |
|
Protection and certification |
|
|
Build-in RCD |
TYPE A + DC6mA leakage sensor built-in |
|
With Cable |
IP65, IK07 |
|
Socket |
IP65, IK07 |
|
Housing fire ratings |
V0 |
|
Operating temperature |
-25 - +55 |
|
Compliance |
IEC61851-1, IEC61851-21-2, IEC61000-4 CE EMC EU/2014 CE Low Voltage EU/2014/35 |
|
Certificate |
CE, UKCA, SAA |
|
Connectivity |
|
|
Authorization |
Auto-start standard / RFID card option |
|
Status indication |
LED ring |
|
Charging protocol |
OCPP 1.6J optional |
|
WLAN communication |
Wi-Fi / Bluetooth 4.2 option |
|
Mechanical |
|
|
Housing |
Polycarbonate |
|
Dimension |
W169 x H380 x D151 mm |
|
Mounting |
Wall or Pole |
Hot Tags: 22kw smart ev charger with dlb function and pen fault detection, China, suppliers, manufacturers, factory, customized, quotation
